The Delay Mapper step is used to add a delay per record.
The image below shows a flow where the Delay Mapper is used.
Adding the Delay Mapper Step
To add a Delay Mapper step in a flow, follow the instructions below:
1. Click on the highlighted icon as shown in the image below.
2. The page below will appear. Select or search for the Delay step as shown in the image below.
Configuring the Delay Mapper Step
Illustrated in the image below is the configuration that is available in the Delay Mapper step.
Delay
Set the Delay to apply in milliseconds. 1 second = 1000 milliseconds,1 minute = 60000 milliseconds.